Connector working environment requirements

The electrical requirements of the connector. When selecting an electrical connector, consider the electrical requirements of the product. The voltage and current requirements of the product, whether the connector is used well in such electrical properties, these questions about electrical requirements need to be considered. In addition, we also need to consider other electrical conditions: resistance, allowable resistance change, millivolt drop, maximum current value, maximum voltage value, inrush current value, characteristic impedance, (voltage standing wave ratio), plugging and unplugging Loss shielding efficiency.

Connector specifications. Connector manufacturers can use approximately 25 test mechanisms (specified specifications) as a source of all or part of their connector's test specifications. Appropriate test specifications must be considered for specific application scenarios, including internationally accepted.

Connector type. What to connect and where to use these issues is the first consideration, which determines the type of industrial connector chosen. The location where the connector is used (indoor, outdoor, corrosive environment, etc.) can affect whether the air plug is to be sealed or shielded from the insulative housing. The type of connector determines which terminal is used and how many conductive terminals to arrange.

The environmental requirements of the connector. Temperature, humidity, and other environmental conditions are determined by the location of the electrical connector, so location and expected environment should be considered. And the applicable period and information of other relevant storage conditions. The description of the environment should also cover requirements for shock and vibration, including requirements for shipping, as well as production environmental conditions such as welding temperature and duration of the welding cycle. The connector manufacturer stated that around the confluent continuous current guided by the connector is the area where the highest temperature is generated.