Connector - green channel between circuits

Improve the production process. The connector simplifies the assembly process of electronic products. It also simplifies the mass production process;

Easy to repair. If an electronic component fails, the failed component can be quickly replaced when the connector is installed;

Easy to upgrade. As technology advances, components can be updated with connectors, replacing old ones with new, more sophisticated components;

Improve design flexibility. The use of connectors gives engineers greater flexibility when designing and integrating new products, as well as when building components with components.

Imagine what would happen if there were no connectors? At this time, the circuits are permanently connected together by continuous conductors. For example, the electronic device is connected to the power supply, and both ends of the connecting wires must be fixedly fixed to the electronic device and the power source by some method (for example, soldering).

In this way, both production and use bring a lot of inconvenience. Take the car battery as an example. Assuming that the battery cable is fixedly soldered to the battery, the car manufacturer has added a workload for installing the battery, adding production time and cost. When the battery needs to be replaced, the car must be sent to the repair station, the old one is removed from the weld, and the new one is welded. This requires more labor. With the connector you can save a lot of trouble, buy a new battery from the store, disconnect the connector, remove the old battery, install a new battery, and reconnect the connector. This simple example illustrates the benefits of a connector. It makes design and production processes easier and more flexible, reducing production and maintenance costs.